A wide range of devices exist which can be plumbed in to water mains to revitalize the water in entire buildings. For buildings with water tanks there are also a special range of devices for immersion.

GRANDER water revitalization devices can be easily installed trouble-free into the main water supply line. The decisive factors for choosing the appropriate device are pipe size, maximum consumption, the charge of the water and the local installation situation.

They are available for pipe sizes of 3/4", 1", 5/4", 6/4", 2", 2 1/2", 3", 4".

For this reason, a definitive decision on the optimal device size can only be reached on site, which is why we also highly value a personal consultation and inspection by our trained consultants.

Installation should take place:

· after the water pipe

· after purifying filters and

· before any other technical equipment (pressure reducing valves, ionic exchanger, dosing systems, magnetic devices etc.)

Effective operational sphere:
Effective operation remains constant even for irregular consumption, long times of non-use, pipe systems that branch out far, circulation etc...

Duration of effectiveness:
The effectiveness of our product has existed for 20 years. Since this time, the revitalization effect has remained at a maximum level and to the complete satisfaction of our customers. The revitalization effect in GRANDER water revitalization equipment does not wear down even after several years of use.

Professional opinion:
The hygenic and technical harmlessness of the use of original Grander water revitalization equipment in drinking water has been confirmed by professional opinion (University of Graz, Technical Monitoring Association of Vienna and the Swiss Gas and Water Industry Association).

Type of material:
All water revitalization equipment is manufactured with V2A stainless steel. Steel grade numbers: water-bearing internal parts 1.4301, external casing 1.4016 (3" and 4" 1.4462).

As a special model, devices in acid-resistant V4A stainless steel (1.4571 internal and external) are also available.

+ extremely straight forward to use
+ simply place in sitting water
+ easily moved if desired

personal swimming pool installation
Place immersion unit in skimmer basket.

spa installation
Place immersion unit in skimmer basket.

well installation
Ideally in areas where wells are popular, it is recommended to mount the GRANDER immersion under under the submersible pump. Although this means removing the the existing pump, pipe, electrical, etc. The end results are worth it!

 holding tank installation
Suspend GRANDER immersion unit into to middle of tank attached by a rope.

lakes and ponds
Place GRANDER immersion unit where most movement of water occurs. Unit can be hung by a rope or attached by apparatus.

For Heating and Cooling Circuits

Sizes:

3/8", 1/2", 3/4", 1", 5/4", 6/4", 2", 2 1/2", 3", 4"

Type of material:
All water revitalization equipment is manufactured with V2A stainless steel. Steel grade numbers: water-bearing internal parts 1.4301, external casing 1.4016 (3" and 4" 1.4462).

As a special model, devices in acid-resistant V4A stainless steel (1.4571 internal and external) are also available.

In order to avoid corrosive contact with zinc-coated lines, we deliver all equipment with red brass double nipples.